Sale!

Bosch KTS 560 Interface

£1,495.00 £1,200.00 ex. VAT

Bosch KTS 560 with DoIP and PassThru capability. Single channel multi meter. (No integrated oscilloscope). Full functionality of the KTS is dependent on subscription to ESI[tronic] software, providing vehicle specific test steps with sensor and actuator presets and providing on screen comparisons against actual values available at extra cost.

SKU: DIDRSP0080 Category: Tags: , , ,

Bosch KTS 560 with DoIP and PassThru capability. Single channel multi meter. (No integrated oscilloscope). Full functionality of the KTS is dependent on subscription to ESI[tronic] software, providing vehicle specific test steps with sensor and actuator presets and providing on screen comparisons against actual values available at extra cost.

Diagnostics are evolving as vehicles become more electronically complex. Therefore a solution is required that is developing at the same rate as these new technologies to successfully diagnose, troubleshoot and repair faults. The KTS 560 satisfies these new technologies with a number of technical features that are only currently available on OEM diagnostic tools.

More and more vehicle manufacturers are using a new diagnostic interface based on Ethernet, also known as DoIP (Diagnostics over Internet Protocol). The advantage is up to 100 times faster data transfer compared to previous technologies which was mostly used for flashing the control unit. It is not unlikely that in the near future, more and more manufacturers will use Ethernet for regular vehicle diagnostics as well. Being prepared for this development, the new diagnostic tester from the KTS series from Bosch supports Ethernet as well as the conventional vehicle interfaces. This means you are ready for the requirements of tomorrow with an intelligent solution from today.

One of the major changes in the architecture of the new generation KTS has the ability to use parallel channels to communicate with the vehicle, allowing communication to more than one CAN system simultaneously, speeding up programming and diagnosis. OEMs, such as Ford, Jaguar Land Rover, BMW and many others are already using this type of communication.

 

Overview

  • Supports “Easy Connect” and other Bosch vehicle specific adapters
  • Enhanced measurement technique included to support diagnosis and vehicle repair
  • Enhanced ECU diagnosis for DoIP (Diagnostics over Internet Protocol); the first product in IAM with this feature
  • Parallel or simultaneous diagnosis possible for a faster overview and reading of values
  • LED display
  • Measuring all actuators and sensors in the vehicle
  • Multi meter measurements during guided trouble-shooting with automatic transfer of measured values
  • Intelligent and future-proof thanks to internal OBD interchangeable adapter
  • Universal OBD plug: Allows connectivity to vehicles with 14 V and 28 V vehicle electrical systems
  • Clear communication thanks to multiplexer and cable adapter recognition: K and L line, SAE and CAN can be switched to all possible terminals on the OBD plug
  • Reliable multiplexer actuation
  • Automatic control unit search function
  • Demo mode allows the 560 to be used without a vehicle connected
  • Resistance measurement with extended measuring ranges
  • Continuity tester for fault localisation
  • Diode measurement for tests in components
  • Voltage measurement with enhanced measurement functions
  • Bluetooth Class 1 standard with a range of up to 100m
  • Automatic KTS module search
  • Fully PassThru compliant
  • Operating systems: Windows 7, Windows 8, Windows 10
  • Powered by ESI[tronic] 2.0

 

Tech Specs

  • KTS560 2-channel multi meter
  • Operating voltage 8V DC-28V DC
  • Connections to PC USB 2.0, Bluetooth® Class 1
  • Weight approx. 0.5 kg
  • Dust and water protection IP53
  • Multi meter bandwidth 100 kHz
  • Oscilloscope sampling rate 20 MS/s
  • Vehicle protocols ISO 15031, ISO 22900, SAE J2534-1 and -2 (PassThru), ISO 9141-2 (K and L), SAE J1850 VPW and PWM, CAN High Speed ISO 11898, ISO 15765-4 (OBD), CAN Single Wire, CAN Low Speed, ISO 13400 (Diagnostics over IP), and other vehicle-specific protocols

Vehicle Coverage

  • Jaguar Land Rover
  • VAG
  • Mercedes-Benz
  • BMW
  • Volvo
  • Vauxhall
  • Others (verification ongoing

What’s in the box?

  • OBD connection cable (1.5 m)
  • Power supply unit
  • Test lead/probe set
  • USB connecting cable (3 m)
  • Trolley mounting parts set
  • Bluetooth® USB adapter
  • Storage case

Additional information

Weight 6 kg

Contact us

Head Office

Maverick Diagnostics Ltd.
Longfields
Buck RD
Commonwood
Wrexham
LL13 9TF

Phone Number

(+44) 1978 856190

Sales (Option 1)
Support (Option 2)

Company No.

10756089

VAT No.

267960949

Send us a message

14 + 10 =

Support Ticket